Maintenance method of the hottest vibrator

2022-08-16
  • Detail

Vibrator maintenance method

vibrator maintenance method 1. Turn on the start switch, and there is no display 1) Open circuit of power plug or power line

2) adjust the mold closing pressure The fuse is burnt out

3). Solution to power switch damage

1) Replace the plug or power cord

2) Replace the fuse tube

3) Replace the power switch II. Adjust the speed knob, and the transportation table has no response

1) The connecting wire plug of the control box and the transportation platform is not connected properly

1 The color of the paint of the electronic tensile testing machine is not beautiful and generous 2) The speed control knob is damaged

3) The speed control board is damaged

4) Motor damage

solution

1) Reconnect the plug

2) Repair or replace the speed control knob

3) Repair or replace the speed control board

4) The tensile strength and plastic characteristics of the material can be measured through inspection or tensile test. Third, the transportation platform acts, but the tachometer always shows zero

1) Tachometer damage

2) Sensor damage

3) Sensor position change

solution

1) Replace the tachometer

2) Replace the sensor

3) Adjust the position of the sensor. 4. The timer does not display

the timer is burnt out

replace the timer. 5. After the timing is reached, the transportation table still continues to run

1) Timer damage

2) Intermediate relay damage

solution

1) Replace the timer

2) Replace the intermediate relay VI. when simulating the operation of the transportation platform, there is a collision sound

the fixing screws are loose

tighten the relevant screws

Copyright © 2011 JIN SHI