Analysis and treatment of ink stacking failure in

2022-09-26
  • Detail

Analysis and treatment of ink stacking fault in the printing process

ink stacking fault caused by ink refers to that ink accumulates on ink rollers, printing plates or blanket, and ink transfer is poor. In addition to paper, ink piling is caused by ink, printing press and plate press. The ink accumulates on the blanket, and the pigment is in a separated state of powder, which is pasted to death, and looks inconsistent in color. This is due to:

(1) the ink is poorly dispersed, and coarse particle inorganic pigments with too high relative density are used in the ink

(2) the ink film is too thick

(3) the ink is diluted too much and the binder is too thin

Troubleshooting: check whether the impact reduces the consumption of petrochemical energy. The experimental machine is level (4) the printing pressure is not solid, and the ink transfer performance of the roller is poor

treatment method

(1) check the printing pressure, ink roller performance and pad

(2) the amount of ink should be appropriate. If the ink is too soft, thicker ink can be used

(3) replace with new ink

related links

in the actual printing work, white ink, gold and silver ink are the most prone to ink stacking failure

expert tips

there are many factors that cause the ink stacking failure. The offset press operator must find out the cause of the failure. Never mention the ink stacking failure and identify it as caused by the ink

this article comes from the Internet, and the copyright belongs to the original author. It is only for everyone to share and learn. If the author believes that infringement is involved, please contact us for in mold labeling packaging system, and we will delete it immediately after verification

Copyright © 2011 JIN SHI